Skip to content

UAVs & Recon

UAVs

UAV Classnames Notes
AR-2i Darter 2 / AR-2i Tayran 2 ITC_Land_B_UAV_AR2i, ITC_Land_O_UAV_AR2i, ITC_Land_I_UAV_AR2i Packable, camera with ITC readouts
AR-2e Darter / AR-2e Trayan ITC_Land_B_UAV_AR2e, ITC_Land_O_UAV_AR2e, ITC_Land_I_UAV_AR2e Packable
MQ-4I Greyhawk ITC_Land_B_UAV_MQ4i Camera with ITC readouts, laser designator for the ROVER tablet
K40i Ababil-3 ITC_Land_O_UAV_K40i, ITC_Land_I_UAV_K40i Camera with ITC readouts
UCAVi Sentinel 2 ITC_Land_B_UAV_UCAVi Camera with ITC readouts

The ITC camera readouts show the view direction in degrees and mils, the grid and altitude of the point under the crosshair and of the UAV, its speed, the camera magnification and the time.

Sending a target to the FDC

In the ITC optics of a UAV, the GLTD or the Strider, Send target to FDC (Ctrl+Shift+T, under Configure → Controls → Configure Addons → ITC Land Systems Redux) sends the target over the datalink to every friendly FDC: the lased spot while the laser is on, else the point under the crosshair. It arrives in their BCS Location Stores as TGT01, TGT02, … with a ping and a hint, ready as the known point of a fire mission. An FDC receives targets once it has opened the BCS. Corrections during adjust fire still go by voice.

Packable equipment

Small UAVs and the remote laser designator are carried as an item and set up where you need them, through the ACE interaction menu:

  • Unpack: self interaction → Equipment → Unpack → the item. After a 5 second progress bar the UAV or designator stands next to you, ready to connect with a UAV terminal.
  • Repack: interaction on the deployed UAV or designator (within 3 m) → Repack UAV / Repack GLTD. You get the item back.
Packed item Unpacks to
ITC_Land_B_AR2i_Packed, ITC_Land_O_AR2i_Packed, ITC_Land_I_AR2i_Packed AR-2i Darter 2 / Tayran 2
ITC_Land_B_AR2e_Packed, ITC_Land_O_AR2e_Packed, ITC_Land_I_AR2e_Packed AR-2e Darter / Trayan
ITC_Land_B_UAV_Packed, ITC_Land_O_UAV_Packed, ITC_Land_I_UAV_Packed Vanilla AR-2 Darter / Tayran
ITC_Land_B_AL6_Packed AL-6 Pelican [NATO]
ITC_Land_B_RemoteGLTD_Packed, ITC_Land_BW_RemoteGLTD_Packed Remote GLTD [NATO] (ITC_Land_B_RemoteGLTD), Remote GLTD (Green) [NATO] (ITC_Land_BW_RemoteGLTD)

The vanilla AR-2 Darter/Tayran and every AL-6 Pelican can be repacked as well.

The UAV Bag (ITC_Land_b_uav_backpack, ITC_Land_o_uav_backpack, ITC_Land_i_uav_backpack) and UAV Bag (AL-6) (ITC_Land_b_uav06_backpack, ITC_Land_o_uav06_backpack, ITC_Land_i_uav06_backpack) are backpacks to carry packed UAVs in.

ROVER tablet

The Rover LAD Tablet (itc_land_tablet_rover) shows the video feed of an aircraft that is lasing a target, like a forward air controller's ROVER terminal.

  1. Carry the tablet and open it: self interaction → Equipment → Open Rover LAD.
  2. Pick the transmitting aircraft. An aircraft only transmits while its laser designator is on; otherwise the tablet shows NO CONNECTION.
  3. Switch the view between DTV, NVG, WHOT and BHOT, and ZOOM in.

The tablet shows your own grid and the aircraft's altitude, speed and direction, the grid and altitude of the lased target, and the time.

Strider RV

Vehicle Classname
Strider RV itc_land_I_StriderRV
Strider RV HMG itc_land_I_StriderRV_HMG
Strider RV GMG itc_land_I_StriderRV_GMG

Strider variants with a commander optic that shows the view direction in degrees and mils, and the grid and altitude of the vehicle and of the point under the crosshair.